Massey Ferguson 175 Hydraulic Problems

massey ferguson 175 hydraulic problems Problems

What should the pressure be and where should I connect the pressure gauge to check the pressure on an MF 175? The lift goes up very slowly and goes down immediately when the engine is switched off.

Massey Ferguson 175 Hydraulic pump problems

If you want to check the pressure, connect a pressure gauge to the QD work ports, or install a pressure gauge to the inlet port of the loader valve and you can check it all.

  • The piston seals could be bad.
  • The valve could be bad.
  • The pump could be wrong.
  • A relief valve could be open.
  • A flow and pressure check would be the best thing to do.
  • The pressure could be in the 2000 psi area with a good pump.
Rate article
M&F
Add a comment